I have a 95 ranger baha seen my truck and not interested in swappin to mustang or toyota suspension so what is all involved prolly gonna run 20s up front and if thats to much the badger than il get 18s lemme know thanx

alot of cussin, cuttin, weldin, drinkin, fabricatin and bleedin...and TIME! at least thats what it was like for me....LOL.

awoooooo..you can say that again!

X2.


my cantilever works now though!!

I already no that i do that all day yesterday well no welding cussin up the storm but like what all do i have to notch n stuff

20s up front? be prepared to cut the aww shucks out of it, not have enough lift to drive and kick yourself in the wanus for not doin a yota clip to begin with :LOL:

what bout 18s how much would ihave to cut i no frame for tierod get rid of ac and heat would ihave to mount the bags higher up to get enough lift or go with one of them bags that gets "superlift" like 13inches?

I'm running 18s in the front of my '95 with 40 series tires and my heater box had to come completely out...we mounted the bags on the radius arms (yes, we plated them off like we did the frame in the back and gusseted the the badger out of them, so they're strong enough...so don't give me crap about it!!! hahaha

I have 18's w/ 235/40's and still have my heat and a/c with the 2.3L.

to quote josh rodgers, "i hope whoever designed ibeams will get beat to death with one, so they will see death coming in the form of the worst suspension design ever."

Is it different than i have a 3.0 i know its a little bigger but ya

snoop, did you have to modify it? my tires are 225/40/18s and before I even let my truck all the way down I could see that there was gonna be a clearance problem so I just went ahead and took it out

a buddy of mine told me that we could cut part of it and glass it back together, so I would still have heat

The only thing I had to modify was the lower a/c line coming out of the condenser. I just had to bend it towards the motor a little bit. It's a tight fit, but it works. Yeah, I know my engine bay looks like the badger!!

ahhhhhhhhh, your bags are mounted waaaaaaaay different than mine...mine are mounted on the radius arms, but my tire was gonna come in and hit the heater box where it plugs up at

215/35 18 is close to a 205/40 17 and mine layd HARD on them

mine lays on 235-45-17 and it hits but its not destroying it so itll be ok. it only hits laid out so im not to worried about it